OPTIMedical OPTI CCA-TS - Page 60

3-20 Operator’s Manual – OPTI CCA-TS
3 CUSTOMIZATION
3.3.3.1.3 Setting up Secure Operator IDs
The <OP IDs> menu is used to enter Operator
identication IDs and password (PIN). With
this feature enabled, the system will “lock out”
unauthorized users from operating the analyzer.
•
Select <OP IDs> in the <Security> menu
(Fig. 3-36).
•
Select <Secure Operator ID Enable>.
NOTE: If you do not select this option, the <Secure
Op IDs> feature is turned off, and operators
will not be required to enter their PIN
numbers to operate the analyzer.
1. Press to enter the Operator ID number
(up to 11 digits) and a unique 4-digit personal
identication number (PIN) to be added to the
list of authorized users.
The analyzer can store up to 300 Operator IDs
and associated PINs.
NOTE: The 4-digit PIN must be unique and will be
required by the operator to access analyzer
functions. The Operator ID number will be
printed on all reports associated with their
PIN.
OR
2. Select an Operator ID number to be deleted
from the list of valid users currently stored in
memory, and press the
button to
remove the operator ID from memory.
OR
3. Press the button to print the list of all
operator IDs, along with their associated PINs,
as currently stored in memory.
4. Press to return to <Ready>.
Fig. 3-36 Select OP IDs