Verify a PCIe Card
7.
Verify that the card is properly installed.
See “Verify a PCIe Card” on page 133.
8.
Configure the PCIe card.
Refer to the documentation shipped with the PCIe card for information about configuring the
PCIe card, including installing required operating systems.
Related Information
■
“Remove a PCIe Card or Filler” on page 129
■
“Verify a PCIe Card” on page 133
Verify a PCIe Card
1.
Verify that the fault LED is not illuminated on the PCIe card.
2.
Verify that the System Service Required LEDs are not illuminated.
3.
Perform one of the following actions based on your verification results:
■ If any of the LEDs are illuminated, see “Interpreting LEDs” on page 35.
■ If none of the LEDs are illuminated, configure the PCIe card as described in
the documentation shipped with the card.
Related Information
■
“Install a PCIe Card or Filler” on page 131
■
“Remove a PCIe Card or Filler” on page 129
■
“PCIe Card Configuration” on page 125
Servicing PCIe Cards 133
To Next Page
Loading...
Need help?
General