Oracle SPARC T7-2 - Locate the Server

Locate the Server
■ Read the serial number from a sticker located on the front of the server or
another sticker on the side of the server.
■ At the Oracle ILOM prompt type:
-> show /System

/System
Targets:
. . .
In the output look for a line under Properties that identifies the product serial number. For
example:
serial_number = BKL1026F8F
Related Information
■
“Front Panel Components (Service)” on page 13
Locate the Server
You can use the Locator LEDs to identify one particular server from many other servers.
1.
At the Oracle ILOM prompt, type,
-> set /System locator_indicator=on
The white System Locator LEDs (one on the front panel and one on the rear panel) blink.
2.
After locating the server with the blinking System Locator LED, turn it off by
pressing the Locator button with a stylus.
Alternatively, you can type an Oracle ILOM command to turn off the System Locator LED.
-> set /System locator_indicator=off
Related Information
■
“Front Panel Components (Service)” on page 13
52 SPARC T7-2 Server Service Manual • July 2019