Install a Power Supply
Caution - There is no “catch” mechanism on the power supply to prevent it from sliding
completely out of the chassis. Use care when removing the power supply to prevent it from
falling.
5.
Install a new power supply.
See “Install a Power Supply” on page 88.
Related Information
■
“Determine Which Power Supply Is Faulty” on page 87
■
“Install a Power Supply” on page 88
Install a Power Supply
This is a hot-service procedure that can be performed by a customer while the server is running.
88 SPARC T7-2 Server Service Manual • July 2019
To Next Page
Loading...
