Enable and Verify a DIMM
Tighten the screw six turns to secure.
4.
Return the server to operation.
See “Returning the Server to Operation” on page 171.
Related Information
■
“Memory Riser and DIMM Configuration” on page 91
■
“Remove a DIMM” on page 102
■
“Enable and Verify a DIMM” on page 108
Enable and Verify a DIMM
1.
At the Oracle ILOM prompt type show faulty.
■ If the output indicates a POST-detected fault, go to step 2.
108 SPARC T7-2 Server Service Manual • July 2019
To Next Page
Loading...
