Tools Needed For Service
attach an antistatic strap to your wrist and then to a metal area on the chassis. Following this
practice equalizes the electrical potentials between you and the server.
Note - An antistatic wrist strap is no longer included in the accessory kit for this server.
However, antistatic wrist straps are still included with options.
Antistatic Mat
Place ESD-sensitive components such as motherboards, memory, and other PCBs on an
antistatic mat.
Related Information
■
“Prevent ESD Damage” on page 57
■
“Tools Needed For Service” on page 49
Tools Needed For Service
You need the following tools for most service operations:
■
Antistatic wrist strap
■
Antistatic mat
■
No. 2 Phillips screwdriver
■
2.5 mm hex driver or key
■
Pen or pencil (to power on server)
Related Information
■
“Safety Information” on page 47
Fillers
A filler is an empty metal or plastic enclosure that is installed at the factory or in the field into
a server component slot that does not contain a functioning component. The filler panels ensure
proper airflow through the system. Depending on the component configuration, the server can
include the following types of fillers:
Preparing for Service 49
To Next Page
Loading...
