Install the Fan Board
The circuit board and the fan holder portions of the fan board should remain together.
9.
Install a new fan board.
See “Install the Fan Board” on page 143.
Related Information
■
“Install the Fan Board” on page 143
Install the Fan Board
This is a cold-service procedure that must be performed by qualified service personnel. Power
down the server completely before performing this procedure.
Caution - This procedure requires that you handle components that are sensitive to ESD which
can cause server components to fail.
1.
Take the necessary ESD precautions.
See “Prevent ESD Damage” on page 57.
2.
Using the fan board cable and power cables from the faulty fan board, plug the
cables into the corresponding connectors on the replacement fan board.
Servicing the Fan Board 143
To Next Page
Loading...
