Oracle SPARC T7-2 - Page 80

Remove a Fan Module
Caution - When removing a fan module, do not rock it back and forth. Rocking fan modules
can damage the fan board connectors.
Caution - When changing fan modules, you can only remove or replace the fan modules. Do
not service any other components in the fan compartment unless the server is shut down and the
power cords are removed.
4.
Install a new fan module.
See “Install a Fan Module” on page 81.
Related Information
■
“Extend the Server to the Service Position” on page 57
80 SPARC T7-2 Server Service Manual • July 2019