Preparing for Server Installation
This section provides the information you need to prepare for the server installation.
Description Links
Review the server physical specifications. “Server Physical Specifications” on page 15
Prepare the space for rackmounting the server,
receiving the packaged server, and maintaining the
server in its rack.
“Space Requirements” on page 16
Review the site electrical requirements and server
power requirements.
“Electrical Power Requirements” on page 18
Review temperature, humidity, and other
environmental requirements for the server.
“Environmental Requirements” on page 20
Review ventilation and cooling requirements for the
rackmounted server.
“Ventilation and Cooling” on page 21
Review Agency Compliance specifications for the
server.
“Agency Compliance” on page 23
Unpack the server and verify the ship kit contents. “Shipping Inventory” on page 23
Assemble the tools required for installation. “Tools and Equipment Needed for
Installation” on page 24
Review ESD requirements and take safety precautions. “ESD and Safety Precautions” on page 24
Install any optional components into the server. “Optional Component Installation” on page 25
Related Information
■
“Installation Procedure Overview ” on page 13
■
“Server Features and Components” on page 27
Server Physical Specifications
The following table lists the physical specifications for the Oracle Server X5-2.
Preparing for Server Installation 15
To Next Page
Loading...
Need help?
General
