Oracle X5-2 User Manual

Powering On the Server
Use a Velcro strap to secure the power cords to the power supply handle as shown in the
following figure.
Caution - Do not operate the server unless all fans, component heak sinks, air baffles, and the
top cover are installed. Damage to server components can occur if the server is operated without
adequate cooling mechanisms.
Powering On the Server
This section explains how to power on the server locally using a serial connection and Oracle
ILOM.
If you want to power on the server remotely using an Ethernet connection and Oracle ILOM,
see “Log In to Oracle ILOM Using a Remote Ethernet Connection” on page 85 for
instructions.
80 Oracle Server X5-2 Installation Guide • January 2021

Oracle X5-2 Specifications

General

Number of Processors	2
Cores per Processor	Up to 18
Form Factor	2U Rackmount
Processor	Intel Xeon E5-2600 v3
Memory	Up to 768 GB DDR4
Power Supply	1200W
Operating System	Oracle Linux, Oracle Solaris
Network	4 x 10Gb Ethernet ports