Oracle Hardware Management Pack
The Oracle ILOM software resides on the server's service processor. Use Oracle ILOM
software to monitor and manage server components. Oracle ILOM software functions include:
■
Configuring network information
■
Viewing and editing hardware configurations for the SP
■
Monitoring vital system information and viewing logged events
■
Managing Oracle ILOM user accounts
You can access the server's SP in either of the following ways:
■
“Log In to Oracle ILOM Using a Local Serial Connection” on page 84
■
“Log In to Oracle ILOM Using a Remote Ethernet Connection” on page 85
For more information about Oracle ILOM, refer to the Oracle Integrated Lights Out Manager
(ILOM) 5.0 Documentation Library at https://www.oracle.com/goto/ilom/docs.
Oracle Hardware Management Pack
Oracle Hardware Management Pack (HMP) provides command-line interface (CLI) tools for
managing your servers, and an SNMP monitoring agent.
■
You can use the Oracle Server CLI tools to configure Oracle servers. The CLI tools work
with Oracle Solaris, Oracle Linux, Oracle VM, other variants of Linux, and Windows
Server operating systems. The tools can be scripted to support multiple servers, as long as
the servers are of the same type.
■
With the Hardware Management Agent SNMP Plugins, you can use SNMP to monitor
Oracle servers and server modules from the operating system using a single host IP address.
This prevents you from having to connect to two management points (Oracle ILOM and the
host).
■
Oracle Linux Fault Management Architecture (FMA) allows you to manage faults at
the operating system level using commands similar to those in the Oracle ILOM Fault
Management shell on systems with Oracle Linux 6.5 or newer. This feature is available on
Hardware Management Pack 2.3.
For more details on Oracle Hardware Management Pack, refer to the Documentation Library at
https://www.oracle.com/goto/ohmp/docs.
Server Management 35
To Next Page
Loading...
Need help?
General
