Oracle X5-2 User Manual

Tools and Equipment Needed for Installation
The ship kit for the Oracle Server X5-2 includes the following items:
■
Power cords, packaged separately with country kit
■
Rackmount kit containing rack rails and installation instructions
■
Miscellaneous hardware, cables, and connectors
■
Oracle Server X5-2 Getting Started Guide
■
Legal and safety documents
Related Information
■
“Optional Component Installation” on page 25
Tools and Equipment Needed for Installation
To install the server, you must have the following tools:
■
No. 2 Phillips screwdriver
■
ESD mat and grounding strap
In addition, you must provide a system console device, such as one of the following:
■
ASCII terminal
■
Workstation
■
Terminal server
■
Patch panel connected to a terminal server
Related Information
■
“Installing the Server Into a Rack” on page 39
ESD and Safety Precautions
Electronic equipment is susceptible to damage by static electricity. Use a grounded antistatic
wriststrap, footstrap, or equivalent safety equipment to prevent electrostatic discharge (ESD)
when you install or service the server.
24 Oracle Server X5-2 Installation Guide • January 2021

Oracle X5-2 Specifications

General

Number of Processors	2
Cores per Processor	Up to 18
Form Factor	2U Rackmount
Processor	Intel Xeon E5-2600 v3
Memory	Up to 768 GB DDR4
Power Supply	1200W
Operating System	Oracle Linux, Oracle Solaris
Network	4 x 10Gb Ethernet ports