Oracle X5-2 User Manual

Logging In or Out of Oracle ILOM
Component Function
Hardware ■ Embedded service processor (SP) chipset that monitors the status and configuration of components
such as fans, storage drives, and power supplies.
■ Two rear panel external connections: NET MGT port Ethernet connection and SER MGT port RJ-45
serial management connection.
Interfaces ■ Web browser interface
■ SSH command-line interface (CLI)
■ IPMI v2.0 CLI
■ SNMP v3 interface
Related Information
■
Oracle Integrated Lights Out Manager (ILOM) 3.2 Documentation Library at: https://
www.oracle.com/goto/ilom/docs
Logging In or Out of Oracle ILOM
You can log in to the Oracle ILOM command-line interface (CLI) locally using the RJ-45 serial
management port (SER MGT) on the server.
You can also log in to the Oracle ILOM web interface or command-line interface remotely
using the network management port (NET MGT) on the server.
To log in to Oracle ILOM, follow these procedures:
■
“Log In to Oracle ILOM Using a Local Serial Connection” on page 84
■
“Log In to Oracle ILOM Using a Remote Ethernet Connection” on page 85
To log out of Oracle ILOM, follow this procedure:
■
“Logging Out From Oracle ILOM” on page 88
Log In to Oracle ILOM Using a Local Serial
Connection
You do not need to know the IP address of the service processor (SP) to log in to Oracle ILOM
locally.
84 Oracle Server X5-2 Installation Guide • January 2021

Oracle X5-2 Specifications

General

Number of Processors	2
Cores per Processor	Up to 18
Form Factor	2U Rackmount
Processor	Intel Xeon E5-2600 v3
Memory	Up to 768 GB DDR4
Power Supply	1200W
Operating System	Oracle Linux, Oracle Solaris
Network	4 x 10Gb Ethernet ports