Log In to Oracle ILOM Using a Remote Ethernet Connection
Note - To enable first-time login and access to Oracle ILOM, a default Administrator account
and its password are provided with the system. To build a secure environment, you must change
the default password (changeme) for the default Administrator account (root) after your initial
login to Oracle ILOM. If this default Administrator account has since been changed, contact
your system administrator for an Oracle ILOM user account with Administrator privileges.
To improve response times, disable the web browser proxy server (if one is enabled).
1.
Ensure that the server is cabled for a remote network management connection
to Oracle ILOM and that the power cords are connected to the power source.
For instructions for establishing a remote management connection to Oracle ILOM see
“Connect Cables and Power Cords” on page 79.
2.
Establish a connection to Oracle ILOM using the CLI or web interface.
■ CLI:
a.
Initiate a secure shell session. Type:
ssh username@host
Where username is the user name of an Oracle ILOM account with Administrator
privileges and host is either the IP address or hostname (when using DNS) of the
server SP.
The Oracle ILOM password prompt appears.
Password:
b.
At the Oracle ILOM password prompt, type your password and press
Enter. For example:
Password: changeme
Oracle ILOM displays the default command prompt (->), indicating that you have
successfully logged in to Oracle ILOM.
■ Web interface:
a.
Type the IP address of the server in the address field of your web
browser and press Enter.
86 Oracle Server X5-2 Installation Guide • January 2021
To Next Page
Loading...
Need help?
General
