Oxford Instruments Omicron NanoScience MercuryiTC User Manual

Operator's Manual
Issue 05 /
Feb 2015 / UMC0071
MercuryiTC
©2014 Oxford Instruments Omicron NanoScience. All rights reserved.
Page 95
This page contains the following parameter boxes and controls:
• ISOBus address
Select an ISOBus address from the drop-down menu.
• Baud
Select a baud rate for the RS232 interface from the drop-down menu.
• Data
Select the number of data bits for the RS232 interface from the drop-down menu.
• Parity
Select a parity scheme for the RS232 interface from the drop-down menu.
• Stop
Select the number of stop bits for the RS232 interface from the drop-down menu.
• Flow Control
Select a flow-control scheme for the RS232 interface from the drop-down menu.
The page also contains the following buttons:
• Alarm
Tap once to access the Alarm Logs page (see section 16.1). If the text is RED an alarm
condition exists.

Oxford Instruments Omicron NanoScience MercuryiTC Specifications

General

Brand	Oxford Instruments Omicron NanoScience
Model	MercuryiTC
Category	Controller
Language	English