MercuryiTC
©2014 Oxford Instruments Omicron NanoScience. All rights reserved.
Page 155
16 ALARMS, INTERLOCKS AND
TROUBLESHOOTING
16.1 Alarms and interlocks
When an error is identified by the iTC, the and button text changes
to red.
There may be an audible alarm (see 16.3).
An interlock may be triggered for safety reasons (see 16.3).
16.1.1 Alarm Logs and Alarms History pages
The Current Alarm Logs page records every alarm as it is generated. The entry for an active
alarm disappears when the alarm is corrected.
The Historic Alarm Logs page records every alarm as it is generated and another entry when
the alarm is corrected.
Safety interlocks are also registered in the alarms log.
From the Home page, tap Settings, then scroll to the General Settings tab. Tap Alarm.
Alternatively, tap Alarm on any page where it appears.
This opens the Current Alarms page.
To Next Page
Loading...