MercuryiTC
©2014 Oxford Instruments Omicron NanoScience. All rights reserved.
Page 55
5 Tap Home to return to the Home page.
6 Tap Control . The Control Loop Configuration page opens.
7 Select the sensor that you want to configure in the Sensor parameter box.
8 Tap the Flow(%) button to select either Manual or Auto Control. Manual configures the gas
controller for open-loop control (see section 4.9.1). Auto configures the gas controller and
associated temperature sensor in a closed control loop (see section 4.9.2).
To Next Page
Loading...