MercuryiTC
©2014 Oxford Instruments Omicron NanoScience. All rights reserved.
Page 57
3 Tap Valve Gearing and enter the required value. See section 14.3 for an explanation of
Valve Gearing.
4 If required, adjust the TES value. See section 14.3.
5 If required, adjust the TVES value. See section 14.3.
6 If required, adjust the Min Gas Flow (%) value to define a minimum opening position for the
needle valve. See section 14.3.
7 Tap Type and select either Siphon or VTI depending which type of flow system you are
using. See also section 14.3.
8 Tap Home to return to the Home page.
To Next Page
Loading...