Panasonic 2WAY Multi - Oil Oil Change Time Alarm

IV–106
oiL Oil Change Time Alarm

Error detection method
When the oil change time exceeds the EEPROM setting-200 hours. (A02 warning is issued when EEPROM
time setting is exceeded.)
Note:
• Engine does not stop with warning.
• No warning detection when the gas type setting is “1.”
• When warning is issued, “Check Oil” fl ashes on remote controller display.

Troubleshooting
It is time to change the engine oil. After changing the oil, reset the oil change time on the outdoor main board.
GHPtroubleshooting.indbIV‒106GHPtroubleshooting.indbIV‒106 2012/11/2611:20:172012/11/2611:20:17