Panasonic 2WAY Multi - L02 Inconsistencise in Indoor;Outdoor Unit Models

IV–67
L02 Inconsistencise in Indoor/Outdoor Unit Models (non-GHP equipment connected)

Error detection method
• An error is detected when indoor units other than GHP models are connected.
• An error is detected when package type L series indoor units and building multi outdoor units are connected.

Troubleshooting
1
Indoor unit 1-1
Check the following, and remove or replace all non-GHP models.
• Indoor unit model
• Indoor control board
● See instructions packaged with servicing indoor board for procedure on replacing indoor control board.
GHPtroubleshooting.indbIV‒67GHPtroubleshooting.indbIV‒67 2012/11/2611:20:122012/11/2611:20:12