Panasonic KX-TDA50

3.13 [1-1] Slot—Card Property - PRI type
(KX-TDA100/KX-TDA200
/KX-TDA600 only)
The properties of the PRI card can be specified.
ISDN CO / QSIG Master / QSIG Slave—T200
Specifies the maximum time that the PBX waits for a reply after sending the L2 command to ISDN.
Default
10 ´ 100 ms
Value Range
0–600 ´ 100 ms
Maintenance Console Location
3.13 [1-1] Slot—Card Property - PRI type (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
None
ISDN CO / QSIG Master / QSIG Slave—T202
Specifies
the maximum time that the PBX waits for a reply after resending the request to use an ISDN line as
a TIE line.
Default
20 ´ 100 ms
Value Range
0–600 ´ 100 ms
Maintenance Console Location
3.13 [1-1] Slot—Card Property - PRI type (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
13.1.13 PRIVATE NETWORK FEATURES
Document Version 2010-11 PC Programming Manual 121
3.13 [1-1] Slot—Card Property - PRI type (KX-TDA100/KX-TDA200/KX-TDA600 only)