12.4 [10-3] DID Table—Automatic Registration
Automatic Registration allows DID numbers and DID destinations in each time mode (day/lunch/break/night)
to be programmed at once for a set of locations in series.
Beginning Entry Location
Specifies the number of the first location to be programmed.
Default
1
Value Range
1–1000
Maintenance Console Location
12.4 [10-3] DID Table—Automatic Registration
Programming Manual References
12.3 [10-3] DID Table
Feature Manual References
4.1.5 DID (Direct Inward Dialing)
Generate DID Number (From)
Specifies the DID number of the first location to be programmed. DID numbers for subsequent locations will
be generated automatically, by adding one to the value of the previous location.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–
9)
Maintenance Console Location
12.4 [10-3] DID Table—Automatic Registration
Programming Manual References
12.3 [10-3] DID Table
Feature Manual References
4.1.5 DID (Direct Inward Dialing)
Document Version 2010-11 PC Programming Manual 753
12.4 [10-3] DID Table—Automatic Registration
To Next Page
Loading...
