6.8 [4-1-6]
Wired Extension—NDSS Link Data - Send
It is possible to cancel the transmission of an extension’s status data over the network. Select the desired
extension from the Extension Number / Name list.
Network BLF Data to NDSS Key of Other PBX - Other PBX (Network PBX ID=1)
Selects
whether extension status data is transmitted over the network for the selected extension. This setting
is automatically set to ON when the feature is used, and can only be manually changed from ON to OFF, to
cancel data transmission.
Default
OFF
Value Range
OFF, ON
Maintenance Console Location
6.8 [4-1-6] Wired Extension—NDSS Link Data - Send
Programming Manual References
11.1 [9-1] TIE Table
Feature Manual References
13.1.15 Private Network Features—NDSS (Network Direct Station Selection)
Document Version 2010-11 PC Programming Manual 563
6.8 [4-1-6] Wired Extension—NDSS Link Data - Send
To Next Page
Loading...
