Panasonic KX-TDA50

– ISDN CLIP— CLIP on Extension/CO (KX-TDA100/KX-TDA200/KX-TDA600 only)
– ISDN CLIP— CLIR
– ISDN CLIP— COLR
• 6.5 [4-1-4] Wired Extension—Flexible Button— Type
• 6.10 [4-2-1] Portable Station—Extension Settings
– ISDN CLIP— CLIP ID
– ISDN CLIP— CLIP on Extension/CO (KX-TDA100/KX-TDA200/KX-TDA600 only)
– ISDN CLIP— CLIR
– ISDN CLIP— COLR
• 6.13 [4-2-3] Portable Station—Flexible Button
—
Type
• 6.18 [4-3] DSS Console— Type
Feature Manual References
3.1.13 CLIP (Calling Line Identification Presentation)
CO Line Access
• 3.5 [1-1] Slot—Port Property - Extension Port—
Connection
• 3.11 [1-1] Slot—Port Property - LCO Port— Connection
• 3.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)— Connection
• 3.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)— Connection
• 3.20 [1-1] Slot—Port Property - IP-GW Port— Connection
• 3.24 [1-1] Slot—Port Property - IP-Extension Port— Connection
• 4.8 [2-6-1] Numbering Plan
—Main—Features
–
Idle Line Access (Local Access)
– Trunk Group Access
– Single CO Line Access
• 4.12 [2-7-2] Class of Service—External Call Block
• 5.1 [3-1-1] Trunk Group—TRG Settings—Main— Line Hunting Order
• 5.2 [3-1-2] Trunk Group—Local Access Priority
• 6.5 [4-1-4] Wired Extension—Flexible Button
– Type
– Parameter Selection (for Single CO)
– Parameter Selection (for Group CO)
• 6.13 [4-2-3] Portable Station—Flexible Button
–
Type
– Parameter Selection (for Single CO)
– Parameter Selection (for Group CO)
• 6.18 [4-3] DSS Console
– Type
– Parameter Selection (for Single CO)
– Parameter Selection (for Group CO)
• 10.1 [8-1] System Setting— ARS Mode
• 12.1 [10-1] CO Line Settings— CO Name
Feature Manual References
3.1.14 CO Line Access
Document Version 2010-11 PC Programming Manual 797
14.2 Feature Programming References