Panasonic KX-TDA50

9.3 [7-3] Special Carrier
If
the PBX has access to multiple telephone companies, a Special Carrier Access Code is required each time
a CO line call is made. By programming these Special Carrier Access Codes here, Toll Restriction (TRS) can
restrict or allow calls to be made by ignoring the codes and looking at the telephone number only. If a Special
Carrier Access Code is found in the dialed number, TRS will look only at the following digits.
A maximum of 20 (with the KX-TDA50/KX-TDA100/KX-TDA200) or 100 (with the KX-TDA600) Special Carrier
Access Codes can be programmed. With the KX-TDA600, 20 codes are displayed at a time. To show other
sets of codes, click the applicable tab.
Special Carrier Access Code
Specifies
a Special Carrier Access Code. Special Carrier Access Codes and Host PBX Access codes should
be unique.
Default
Not stored.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Maintenance Console Location
9.3 [7-3] Special Carrier
Programming Manual References
None
Feature Manual References
16.1.2 Special Carrier Access Code
17.1.6 TRS (Toll Restriction)
700 PC Programming Manual Document Version 2010-11
9.3 [7-3] Special Carrier