Panasonic KX-TDA50

6.17 [4-2-6] Portable Station—Single CO
Appearance (KX-TDA50
only)
It is possible to display CO line information in real time on the display of a KX-WT125 or KX-WT126 when PS
soft buttons are assigned as Single CO buttons.
Parameter Selection (for Single CO)
Selects the CO line to be displayed on the PS. The CO line name, if set, is also displayed here.
Default
1–12: 01–12
Value Range
01–16
Maintenance Console Location
6.17 [4-2-6] Portable Station—Single CO Appearance (KX-TDA50 only)
Programming Manual References
3.35 [1-3] Option
—
System Wireless—CO
Status Display in Standby (KX-WT125/126 only) (Need System
Restart) (KX-TDA50 only)
6.13 [4-2-3] Portable Station—Flexible Button—
Parameter Selection (for Single CO)
12.1 [10-1] CO Line Settings— CO Name
Feature Manual References
13.1.25 PS—CO Status Display (KX-WT125/KX-WT126 only) (KX-TDA50 only)
630 PC Programming Manual Document Version 2010-11
6.17 [4-2-6] Portable Station—Single CO Appearance (KX-TDA50 only)