Panasonic KX-TDA50

Dial Mode Selection
• 3.11 [1-1] Slot—Port Property - LCO Port
– Dialing Mode
– DTMF Width
– Pulse Speed
• 3.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
– CO Dial Mode
– DTMF Width
– CO Pulse Speed
Feature Manual References
4.1.2 Dial Mode Selection
Dial Tone
• 4.17 [2-9] System Options—Option 3
–
Dial Tone—Distinctive Dial Tone
– Dial Tone—Dial Tone for Extension
– Dial Tone—Dial Tone for ARS
Feature Manual References
4.1.3 Dial Tone
Dial Tone Transfer
• 6.5 [4-1-4] Wired Extension—Flexible Button
–
Type
– Parameter Selection (for TRS Level Change)
• 6.13 [4-2-3] Portable Station—Flexible Button
– Type
– Parameter Selection (for TRS Level Change)
• 6.18 [4-3] DSS Console
– Type
– Parameter Selection (for TRS Level Change)
Feature Manual References
4.1.4 Dial Tone Transfer
DID (Direct Inward Dialing)
• 4.4 [2-3] Timers & Counters—Miscellaneous
—
Incoming Call Inter-digit Timer—DID
• 12.2 [10-2] DIL Table & Port Settings—DID/TIE
– Distribution Method
– DID/TIE—Remove Digit
– DID/TIE—Additional Dial
• 12.3 [10-3] DID Table
800 PC Programming Manual Document Version 2010-11
14.2 Feature Programming References