4.5 [2-4] Week Table
A
specific time mode (day, night, lunch, or break) can be selected for operation depending on the time of day.
The time mode can be switched either automatically or manually. Select the desired switching mode from the
Time Service Switching Mode option.
Time Table numbers correspond to tenant numbers (for example, Tenant 1 uses Time Table 1). Select the
desired Time Table from the Time Table No. list.
When in Automatic Switching mode, the time modes of the tenant are switched as programmed in the
corresponding Time Table. Manual switching is possible only from an authorized extension (determined by
COS).
• To adjust the currently displayed Time Table, click and drag the divisions between two time periods.
• To program the time blocks of the currently displayed Time Table, including adding or deleting time blocks,
click Time Setting.
Document Version 2010-11 PC Programming Manual 269
4.5 [2-4] Week Table
To Next Page
Loading...
