9.5 [7-5] Miscellaneous
Toll
Restriction (TRS) prohibits an extension from making certain CO line calls. The following optional settings
can be programmed to activate a TRS check, override TRS, or switch between TRS methods.
TRS Override by System Speed Dialing
Enables an outgoing CO line call to override TRS when the call is made using System Speed Dialing.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
9.5 [7-5] Miscellaneous
Programming Manual References
8.1 [6-1] System Speed Dial
Feature Manual References
17.1.6 TRS (Toll Restriction)
TRS Check for Dial "* #"
Enables a TRS check for the user-dialed
"
" and "#". This is useful in preventing unauthorized calls which
could possibly be made through certain telephone company exchanges.
Default
No Check
Value Range
No Check, Check
Maintenance Console Location
9.5 [7-5] Miscellaneous
Programming Manual References
None
Feature Manual References
17.1.6 TRS (Toll Restriction)
702 PC Programming Manual Document Version 2010-11
9.5 [7-5] Miscellaneous
To Next Page
Loading...
