5.19 [3-7-2] VM(DPT) Group—Unit Settings
A VM (DPT) group has a floating extension number, which can be assigned as the destination for redirected
calls and incoming calls.
To assign extension numbers to the group, click Member List. To view a list of all programmed extension
numbers and types, click Extension List View.
Floating Extension No.
Specifies the floating extension number of the VM (DPT) group.
Default
VM Unit No. 1: 500
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
5.19 [3-7-2] VM(DPT) Group—Unit Settings
Programming Manual References
3.5 [1-1] Slot—Port Property - Extension Port
Feature Manual References
19.1.3 Voice Mail (VM) Group
19.1.4 Voice Mail DPT (Digital) Integration
Group Name
Specifies
the name of the VM (DPT) group, which will be shown on the display of extensions that call the VM
(DPT) group.
Default
VM Unit No. x: Voicemail x
Value Range
Max. 20 characters
Maintenance Console Location
5.19 [3-7-2] VM(DPT) Group—Unit Settings
Programming Manual References
3.5 [1-1] Slot—Port Property - Extension Port
Feature Manual References
19.1.3 Voice Mail (VM) Group
442 PC Programming Manual Document Version 2010-11
5.19 [3-7-2] VM(DPT) Group—Unit Settings
To Next Page
Loading...
