Panasonic KX-TDA50

10.8 [8-7] Authorization Code for TRG
An Authorization code can be specified for each trunk group. The Authorization codes entered here can be
added
to user-dialed numbers by adding "G" to the
Modify Command
specified on the Carrier tab of screen
10.6 [8-5] Carrier.
8 trunk groups are displayed on the screen at a time. To display other groups, click the applicable tab.
Authorization Code for Trunk Group—
TRG 01–TRG 64 (KX-TDA50/KX-TDA100/
KX-TDA200), or TRG 01–TRG 96 (KX-TDA600)
Specifies the Authorization code of each carrier for each trunk group.
Default
Not stored.
Value Range
Max. 10 digits (consisting of 0–9, *, and #)
Maintenance Console Location
10.8 [8-7] Authorization Code for TRG
Programming Manual References
10.6 [8-5] Carrier—Carrier—
Modify Command
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
718 PC Programming Manual Document Version 2010-11
10.8 [8-7] Authorization Code for TRG