10.3 [8-3] Routing Plan Time
The start and end times of a maximum of 4 different time blocks are shown for each day of the week. There
are 16 (with the KX-TDA50/KX-TDA100/KX-TDA200
) or 48 (with the KX-TDA600) Routing Plan Tables, and
each Routing Plan Table can have its own time blocks. Select the desired Routing Plan Table number from
the Routing Plan list.
• To adjust the currently displayed Routing Plan, click and drag the divisions between two time periods.
• To program the time blocks of the currently displayed Routing Plan, including adding or deleting time blocks,
click Time Setting.
710 PC Programming Manual Document Version 2010-11
10.3 [8-3] Routing Plan Time
To Next Page
Loading...
