Panasonic KX-TDA50

• 13.1 [11-1] Main—Password
– System Password - PT Programming—Prog ** : User Level
– System Password - PT Programming—Prog *# : Administrator Level
– Manager Password - PT Programming—Prog *1
Feature Manual References
13.1.29 PT Programming
Q
Quick Dialing
• 4.9 [2-6-2] Numbering Plan
—Quick Dial
Feature Manual References
14.1.1 Quick Dialing
R
Redial, Last Number
• 4.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone
–
Automatic Redial—Repeat Counter (KX-TDA100/KX-TDA200/KX-TDA600 only)
– Automatic Redial—Redial Call Ring Duration (KX-TDA100/KX-TDA200/KX-TDA600 only)
– Automatic Redial—Analog
CO Mute / Busy Detection Timer (KX-TDA100/KX-TDA200/KX-TDA600
only)
• 4.8 [2-6-1] Numbering Plan—Main—Features—
Redial
• 4.17 [2-9] System Options—Option 2
–
Redial—Automatic Redial when No Answer (ISDN) (KX-TDA100/KX-TDA200/KX-TDA600 only)
– Redial—Save Dial After Connection to Redial Memory
– Redial—Call Log by Redial key
• 6.1 [4-1-1] Wired Extension—Extension Settings
—Option 7—
Outgoing Call Log Memory
• 6.10 [4-2-1] Portable Station—Extension Settings
—Option 7—
Outgoing Call Log Memory
Feature Manual References
15.1.1 Redial, Last Number
Ring Tone Pattern Selection
• 4.14 [2-8-1] Ring Tone Patterns—Call from CO—
Ring Tone Pattern Plan 1–8
• 4.15 [2-8-2] Ring Tone Patterns—Call from Doorphone
—
Ring Tone Pattern Plan 1–8
• 4.16 [2-8-3] Ring Tone Patterns—Call from Others— Extension—Ring Tone Pattern Plan 1–8
• 4.17 [2-9] System Options—Option 1— PT Operation—PT Ring Off Setting
• 6.1 [4-1-1] Wired Extension—Extension Settings
—Option 1—
Ring Pattern Table
• 6.10 [4-2-1] Portable Station—Extension Settings
—Option 1—
Ring Pattern Table
824 PC Programming Manual Document Version 2010-11
14.2 Feature Programming References