Panasonic KX-TDA50

4.16 [2-8-3] Ring Tone Patterns—Call from Others
Different ring tone patterns can be selected for incoming intercom calls and ringing triggered by certain PBX
features (Timed Reminder, Call Back, and Live Call Screening). A maximum of 8 Ring Tone Pattern Tables
can be programmed, and any pattern table can be selected for use by an extension.
For
more information on ring tone patterns, see "15.1.2 Ring Tone Pattern Selection" in the Feature Manual.
Extension—Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for incoming intercom calls.
Default
Double
Value Range
Single, Double
, Triple
Maintenance Console Location
4.16 [2-8-3] Ring Tone Patterns—Call from Others
Programming Manual References
6.1 [4-1-1] Wired Extension—Extension Settings—Option 1—
Ring Pattern Table
6.10 [4-2-1] Portable Station—Extension Settings
—Option 1—
Ring Pattern Table
Feature Manual References
None
Timed Reminder—Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for Timed Reminder alarms.
Default
Triple
Value Range
Single, Double
, Triple
Maintenance Console Location
4.16 [2-8-3] Ring Tone Patterns—Call from Others
Programming Manual References
6.1 [4-1-1] Wired Extension—Extension Settings—Option 1—
Ring Pattern Table
6.10 [4-2-1] Portable Station—Extension Settings
—Option 1—
Ring Pattern Table
Feature Manual References
None
Document Version 2010-11 PC Programming Manual 335
4.16 [2-8-3] Ring Tone Patterns—Call from Others