Panasonic KX-TDA50

3.28 [1-1] Slot—OPB3 Card Property—Card
Command (KX-TDA100/KX-TDA200
/KX-TDA600
only)
Commands for the service cards installed on the OPB card can be programmed.
INS
Puts the card in service.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
3.28 [1-1] Slot—OPB3 Card Property—Card Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
None
OUS
Takes the card out of service.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
3.28 [1-1] Slot—OPB3 Card Property—Card Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
None
214 PC Programming Manual Document Version 2010-11
3.28 [1-1] Slot—OPB3 Card Property—Card Command (KX-TDA100/KX-TDA200/KX-TDA600 only)