Number of Registration
Specifies the number of locations to be programmed.
Default
100
Value Range
1–1000
Maintenance Console Location
12.4 [10-3] DID Table—Automatic Registration
Programming Manual References
12.3 [10-3] DID Table
Feature Manual References
4.1.5 DID (Direct Inward Dialing)
Destination—Day, Lunch, Break, Night
Specifies the number of the DID destination in each time mode for the first location to be programmed. If the
same destination is to be used for all locations for a certain time mode, click the appropriate Same all check
box.
If the Same all check box for a certain time mode is not clicked, the destination numbers for subsequent
locations will be generated automatically, by adding one to the value of the previous location for that time mode.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
12.4 [10-3] DID Table—Automatic Registration
Programming Manual References
12.3 [10-3] DID Table
Feature Manual References
4.1.5 DID (Direct Inward Dialing)
754 PC Programming Manual Document Version 2010-11
12.4 [10-3] DID Table—Automatic Registration
To Next Page
Loading...
