a. Carefully read this important additional information, which includes updates to this and other
manuals.
b. Click OK to close this window.
4.
a. Enter the Installer Level Programmer Code (default: INSTALLER).
Note
There
are 2 other Programmer Codes with limited authorization: Administrator Level (default:
ADMIN), and User Level (default: USER). (® 1.2.2 Password Security)
b. Click OK.
5. Click Connect.
6.
a. Select your PBX model from PBX Model.
b. Select the USB tab.
Note
To connect to the PBX via USB, the KX-TDA USB driver must be installed on the PC, as
explained above in
"Installing the Maintenance Console".
c. Enter the system password for installer (default: 1234).
d. Click Connect.
7. Follow the instructions of the Quick Setup wizard for the basic items in Quick Setup.
You may now begin programming the PBX.
Document Version 2010-11 PC Programming Manual 13
1.2.1 Installing and Starting the Maintenance Console
To Next Page
Loading...
