Panasonic KX-TDA50

Default
Not stored.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Maintenance Console Location
3.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
3.1.13 CLIP (Calling Line Identification Presentation)
CO Dial Mode
Selects the type of signal used to dial out to a CO line.
Default
DTMF
Value Range
DTMF, Pulse
Maintenance Console Location
3.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
4.1.2 Dial Mode Selection
Channel Type
Selects the channel type.
Default
Undefined
Value Range
Undefined
: Not assigned
GCOT: Ground Start Central Office
LCOT: Loop Start Central Office
DID: Direct Inward Dialing
Document Version 2010-11 PC Programming Manual 175
3.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)