Panasonic KX-TDA50

Default
Current port number
Value Range
Port number
Maintenance Console Location
3.20 [1-1] Slot—Port Property - IP-GW Port
Programming Manual References
None
Feature Manual References
None
Connection
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
• Click the desired cell in the column.
• Select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
3.20 [1-1] Slot—Port Property - IP-GW Port
Programming Manual References
3.21 [1-1] Slot—Port Property - IP-GW Port—Connection Command
Feature Manual References
None
188 PC Programming Manual Document Version 2010-11
3.20 [1-1] Slot—Port Property - IP-GW Port