Feature Manual References
9.1.15 IP-PT (IP Proprietary Telephone)
Voice (RTP) UDP Port No. (IP-PT)
Specifies
the UDP port used to transmit and receive RTP (Realtime Transfer Protocol) data on the IP-PT side.
This must be changed if another network application is using the same port.
For voice communications, an IP-PT uses 64 (with the IP-EXT16 card) or 16 (with the IP-EXT4 card) contiguous
UDP ports, starting from the port number specified here.
Default
8000
Value Range
1024–65472
Maintenance Console Location
3.23 [1-1] Slot—Card Property - IP Extension—Common Settings
Programming Manual References
None
Feature Manual References
9.1.15 IP-PT (IP Proprietary Telephone)
196 PC Programming Manual Document Version 2010-11
3.23 [1-1] Slot—Card Property - IP Extension—Common Settings
To Next Page
Loading...
