Panasonic KX-TDA50

Default
Yes
Value Range
Yes, No
Maintenance Console Location
3.26 [1-1] Slot—SIP-GW Port Property (KX-TDA50 only)
Programming Manual References
None
Feature Manual References
None
E911
Specifies
whether to display the caller’s number when dialing a number registered as an Emergency Number.
To use this feature, it is necessary that:
– at least one Emergency Number is registered.
– PBX Caller ID for the SIP-GW card is enabled. For details, refer to the documentation for the card.
Default
No
Value Range
Yes, No
Maintenance Console Location
3.26 [1-1] Slot—SIP-GW Port Property (KX-TDA50 only)
Programming Manual References
9.4 [7-4] Emergency Dial—
Emergency Number
Feature Manual References
None
Document Version 2010-11 PC Programming Manual 207
3.26 [1-1] Slot—SIP-GW Port Property (KX-TDA50 only)