Panasonic KX-TDA50

Input Signal Detection Reopening Time
Specifies
the length of time after the sensor has been triggered during which any further input from the sensor
will be ignored.
Default
10 s
Value Range
10 ´ n (n=1–255) s
Maintenance Console Location
3.27 [1-1] Slot—OPB3 Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
5.1.9 External Sensor
SVM Feature
Specifies whether or not to use the ESVM card as an SVM card. It is possible to use the ESVM card as an
SVM card, MSG card (OGM feature), or both.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
3.27 [1-1] Slot—OPB3 Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
12.1.2 OGM (Outgoing Message)
16.1.5 SVM (Simplified Voice Message)
MSG Feature
Specifies whether or not to use the ESVM card as a MSG card. It is possible to use the ESVM card as an
SVM card, MSG card (OGM feature), or both.
212 PC Programming Manual Document Version 2010-11
3.27 [1-1] Slot—OPB3 Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)