Automatic Redial—Analog CO Mute / Busy Detection Timer (KX-TDA100/
KX-TDA200/KX-TDA600
only)
Specifies the length of time before the PBX stops muting the caller’s voice and cancels busy tone detection
when Automatic Redial to analog CO line is performed.
Default
8 s
Value Range
0–15 s
Maintenance Console Location
4.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
15.1.1 Redial, Last Number
Dial—Hot Line (Pickup Dial) Start
Specifies
the length of time between going off-hook and the start of automatic dialing when the Hot Line feature
is set.
Default
1 s
Value Range
0–15 s
Maintenance Console Location
4.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
8.1.6 Hot Line
Dial—Extension First Digit
Specifies the length of time after going off-hook within which the first digit of a feature number or destination
must be dialed before a reorder tone is heard.
246 PC Programming Manual Document Version 2010-11
4.4 [2-3] Timers & Counters
To Next Page
Loading...
