Panasonic KX-TDA50

Programming Manual References
None
Feature Manual References
1.1.2 Account Code Entry
Call Hold / Call Hold Retrieve
Specifies the feature number used to hold a call or retrieve a call on hold from the holding extension.
Default
*50
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.8 [2-6-1] Numbering Plan
—Main
Programming Manual References
None
Feature Manual References
3.1.2 Call Hold
Call Hold Retrieve : Specified with a Holding Extension Number
Specifies the feature number used to retrieve a held call from a different extension by specifying a holding
extension number.
Default
*51
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.8 [2-6-1] Numbering Plan
—Main
Programming Manual References
None
Feature Manual References
3.1.2 Call Hold
Document Version 2010-11 PC Programming Manual 287
4.8 [2-6-1] Numbering Plan—Main