Panasonic KX-TDA50 - Page 344

Feature Manual References
8.1.1 Hands-free Answerback
PT Operation—Automatic Hold by ICM / CO / ICD Group key
Selects
whether calls are disconnected or held when an INTERCOM, PDN, CO, or ICD Group button is pressed
while having a conversation.
Default
Disconnect
Value Range
Disable (Disconnect), Enable
Maintenance Console Location
4.17 [2-9] System Options
Programming Manual References
6.5 [4-1-4] Wired Extension—Flexible Button
6.13 [4-2-3] Portable Station—Flexible Button
Feature Manual References
3.1.2 Call Hold
PT Operation—Hold Key Mode
Selects which extensions can retrieve a held call or a call that is transferred by Call Transfer without
Announcement feature.
Default
Hold
Value Range
Hold: Any extension can retrieve a held call.
Exclusive Hold
: Only the holding extension can retrieve a held call.
Maintenance Console Location
4.17 [2-9] System Options
Programming Manual References
None
Feature Manual References
3.1.2 Call Hold
344 PC Programming Manual Document Version 2010-11
4.17 [2-9] System Options