Panasonic KX-TDA50 - Page 347

Programming Manual References
None
Feature Manual References
None
End of Dial Plan—[#] as End of Dial for en Bloc mode (KX-TDA100/KX-TDA200/
KX-TDA600 only)
Specifies whether to automatically send "#" as an end code when dialing to an ISDN line; if used as the end
code, "#" will not be dialed out as part of a number even when the "#" key is pressed.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
4.17 [2-9] System Options
Programming Manual References
3.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—CO Setting—
ISDN
In/Out Call Type
Feature Manual References
9.1.16 ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES
Redial—Automatic Redial when No Answer (ISDN) (KX-TDA100/KX-TDA200/
KX-TDA600 only)
Selects
whether Automatic Redial to an ISDN line is performed when the called party does not answer within
a preprogrammed time period.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
4.17 [2-9] System Options
Document Version 2010-11 PC Programming Manual 347
4.17 [2-9] System Options