EasyManua.ls Logo

Panasonic KX-TDA50 - Page 360

Panasonic KX-TDA50
834 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Enable: The CLIP number of the calling party is sent.
Maintenance Console Location
4.17 [2-9] System Options
Programming Manual References
None
Feature Manual References
13.1.16 Private Network Features—Network ICD Group
9.1.4 ICD Group Features—Outside Destinations
Private Network—Public
Call through Private Network—Minimum Public Caller
ID Digits
Specifies the minimum length of Caller ID required for a call from a private network to be considered as a call
from a public network.
Default
9
Value Range
0–15
Maintenance Console Location
4.17 [2-9] System Options
Programming Manual References
None
Feature Manual References
3.1.1 Caller ID
Private Network—TIE Call by Extension Numbering (Optional SD Card
Required)
Enables
extensions at PBXs connected in a network to have the same extension numbering scheme and make
TIE line calls to each other. For example, extension 101 is registered at PBX 1, and extension 102 is registered
at PBX 2. The user of extension 1 dials 102 and the dialed number is not found at the local PBX, so the call is
redirected to the specified TIE Line and connected to extension 102.
If disabled, different leading numbers need to be assigned for extensions at each PBX.
Default
Disable
360 PC Programming Manual Document Version 2010-11
4.17 [2-9] System Options

Table of Contents

Other manuals for Panasonic KX-TDA50

Related product manuals