Feature Manual References
13.1.13 PRIVATE NETWORK FEATURES
Line Hunting Order
Specifies
the CO line hunting sequence for the trunk group. The hunting sequence can be programmed to start
from the lowest or highest numbered CO lines, or to rotate uniformly among all CO lines.
Default
High -> Low
Value Range
High -> Low, Low -> High, Rotation
Maintenance Console Location
5.1 [3-1-1] Trunk Group—TRG Settings
Programming Manual References
12.1 [10-1] CO Line Settings
Feature Manual References
3.1.14 CO Line Access
CO-CO Duration Time (*60s)
Specifies the length of time that a CO-to-CO line call can be maintained before being disconnected.
Default
10 min
Value Range
None, 1–60 min
Maintenance Console Location
5.1 [3-1-1] Trunk Group—TRG Settings
Programming Manual References
12.1 [10-1] CO Line Settings
Feature Manual References
3.1.15 CO Line Call Limitation
Extension-CO Duration Time (*60s)
Specifies the length of time that an extension-to-CO line call can be maintained before being disconnected.
Document Version 2010-11 PC Programming Manual 383
5.1 [3-1-1] Trunk Group—TRG Settings
To Next Page
Loading...
