VM DTMF Status Signal—FWD to Extension Ringback Tone
Specifies the DTMF status signal the PBX sends to the VPS when the call has been forwarded to another
extension and the PBX is calling the destination extension.
Default
8
Value Range
Max. 4 digits (consisting of 0–9, *, #, and P [pause])
Maintenance Console Location
5.21 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Manual References
None
VM DTMF Command—Recording Message
Specifies
the DTMF command the PBX sends to the VPS when a call is forwarded, intercepted, or transferred
to the VPS, so that the caller can leave a message in a certain mailbox.
Default
H
Value Range
Max. 16 digits (consisting of 0–9, *, #, H [mailbox number], and P [pause])
Maintenance Console Location
5.21 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Manual References
None
VM DTMF Command—Listening Message
Specifies
the DTMF command the PBX sends to the VPS when an extension user answers a message waiting
notification from the VPS, so that the extension user can retrieve a new message in a certain mailbox without
having to dial the mailbox number manually.
452 PC Programming Manual Document Version 2010-11
5.21 [3-8-1] VM(DTMF) Group—System Settings
To Next Page
Loading...
