Panasonic KX-TDA50 - Page 488

When changing the port type of an extension port in DPT Type—
Type on the 3.5 [1-1] Slot—Port Property
- Extension Port screen, the
Wireless XDP setting must be deleted first.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
20.1.4 Wireless XDP Parallel Mode
Ring Pattern Table
Specifies the Ring Tone Pattern Table to be used by the extension.
Default
1
Value Range
1–8
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
4.14 [2-8-1] Ring Tone Patterns—Call from CO
4.15 [2-8-2] Ring Tone Patterns—Call from Doorphone
4.16 [2-8-3] Ring Tone Patterns—Call from Others
Feature Manual References
15.1.2 Ring Tone Pattern Selection
Programmed Mailbox No.
Specifies the mailbox number of the extension
’s mailbox for Voice Processing Systems (VPS) with DTMF
Integration.
Default
Same number as the corresponding extension number.
488 PC Programming Manual Document Version 2010-11
6.1 [4-1-1] Wired Extension—Extension Settings